Vistec Worldmap

Sales & Support Offices

Vistec Electron Beam Pte. Ltd.

Taiwan Branch
4F, No. 12, Fuxing 5th Street
Jhubei City
Hsinchu County 30271
Taiwan, R.O.C.

phone +886 3 5033032
telefax +886 3 657 7355
Email

How to find us

How to find us

1. Driving:
It's about 53km (an hour driving) from Taoyuan International Airport to Vistec Electron Beam Jhubei Office. If you head south-west on Hanjan N. Road, it leads to the Highway 2. Take exit the interchange toward Highway 1 and head south on Highway 1, then take exit Jhubei interchange.

2. Taxi:
There is a taxi rank outside the arrival building in Taoyuan International Airport. Or you can call to the office and we will arrange the taxi pick-up for you.


Vistec Lithography B.V.


Indian Branch.
#308, Block A, May Flower Garden
Nagavarapallya Main Road
Bangalore
Karrnataka 560093
India

phone +91 80 2534 2282
telefax +91 80 2534 8610
Email

How to find us

For all other locations contact us via email.

Vistec Lithography B.V.

Korea Branch
King Plaza Building, Room #901
5-1 Chang-dong, Dobong-gu
Seoul
Korea

phone +82 10 5303 9304
telefax +82 10 2900 9304
Email

How to find us

How to find us

Maps and Driving Directions are currently not available.
For more information about how to find us please contact us via phone or email.

Vistec Lithography B.V.

 

Beijing Representative Office
L24, Tower 3, China Central Place
77 Jianguo Road, Chaoyang District
Beijing 100025, China

 

phone  +86 10 8587 2471
telefax +86 10 8587 2473
Email

How to find us

How to find us

Maps and Driving Directions are currently not available.
For more information about how to find us please contact us via phone or email.


Vistec Electron Beam GmbH

Goeschwitzer Strasse 25
07745 Jena
Germany

phone +49 3641 65 1900
telefax +49 3641 65 1922
Email

How to find us

How to find us in the Technology Park Göschwitz

Approach from Berlin or Munich

(Motorway Route A9 via big junction "Hermsdorfer Kreuz")


Coming from Berlin / Leipzig or Munich via the motorway A9 drive to the
"HERMSDORFER KREUZ" and turn onto motorway A4 into the direction
FRANKFURT and ERFURT.


After approx. 12 km leave the motorway A4 through the exit "JENA GÖSCHWITZ".
This is the third Jena motorway exit following immediately after the long bridge over the Saale river. You are stopped by the traffic lights at a big junction. Cross this junction and continue straight on following the signs "Gewerbegebiet Göschwitz" (Industrial Estate Goeschwitz) until you reach the big blue JENOPTIK building on your right side (Technologiezentrum Bau 14). Vistec Electron Beam GmbH is located on the second floor of this building.
Good luck and drive carefully!

Approach from Frankfurt / Erfurt
(Motorway Route A4)


Coming from Frankfurt or Erfurt via the motorway A4 leave the motorway through the exit "JENA GÖSCHWITZ". Turn to the left into direction JENA. Pass below the motorway bridge and after approx. 500m at the first junction (traffic lights) turn to the right and follow the signs "Gewerbegebiet Göschwitz" (Industrial Estate Goeschwitz) until you reach the big blue JENOPTIK building located on your right side (Technologiezentrum Bau 14). Vistec Electron Beam GmbH is located on the second floor of this building.
Good luck and drive carefully!

Approach from Dresden

(Motorway Route A4)


Coming from Dresden pass the "HERMSDORFER KREUZ" and stay on motorway
A4. After approx. 12 km leave the motorway A4 through the exit "JENA GÖSCHWITZ". This is the third Jena motorway exit following immediately after the long bridge over the Saale river. You are stopped by the traffic lights at a big junction.


Cross this junction and continue straight on following the signs "Gewerbegebiet Göschwitz" (Industrial Estate Goeschwitz) until you reach the big blue JENOPTIK building on your right side (Technologiezentrum Bau 14). Vistec Electron Beam GmbH is located on the second floor of this building.
Good luck and drive carefully!

For all other locations contact us via email.

Vistec Lithography B.V.

De Dintel 27a
5684 PS Best
The Netherlands

phone +31 499 336 880
telefax +31 499 336 899
Email

How to find us

How to find us


Vistec Lithography Inc.

4030 Clipper Court
Fremont, CA 94538
USA

phone +1 518 874 3184
telefax +1 518 874 3196
Email

How to find us

How to find us

Maps and Driving Directions are currently not available.
For more information about how to find us please contact us via phone or email.

For all other locations contact us via email.

Vistec Lithography Inc.

125 Monroe Street
Watervliet, NY 12189
USA

phone +1 518 874 3000
telefax +1 518 874 3198
Email

How to find us

How to get to Watervliet Arsenal

From the Airport:
The easiest way from the airport to Watervliet Arsenal is by following the signs out of the airport to Route 155. Staying on Route 155 east will bring you right to the arsenal. The road makes a couple sharp turns left and right but stay on Route 155, cross Route 9, and as you come down the hill you will see the arsenal spread out in front of you. Route 155 ends at Route 32. Turn right and follow the arsenal fence. You will go right past the Main Gate. This is closed due to security conditions. One more right turn and you are at the South Gate (the only gate now open). Stop and register with the guards.
(* please see note below)

From the north:
South on I-87 (Northway) to Exit 7 towards Troy (Rt. 7). Route 7 to I-787 South towards Albany. I-787 South to first exit which is marked 23rd Street exit (Watervliet). At exit ramp turn right, then immediately enter the left turn lane. At stop light turn left (Broadway). The main gate for the arsenal is approximately 1 miles on the right, after the light on Broadway. You will go right past the Main Gate. This is closed due to security conditions. One more right turn and you are at the South Gate (the only gate now open). Stop and register with the guards.
(* please see note below)

From the south:

North on NYS Thruway to exit 23. Exit 23 to I-787 North toward Albany/Troy. Stay on I-787 past Albany and exit at 23rd Street exit (Watervliet). Left at stop light remain in left lane and turn left at next stop light (Broadway). Main gate for the arsenal is approximately 1 miles on the right after stop light on Broadway. You will go right past the Main Gate. This is closed due to security conditions. One more right turn and you are at the South Gate (the only gate now open). Stop and register with the guards.
(* please see note below)

From the east:

I-90 to 787 North. Right on 787 to 23rd street exit (Watervliet) Left at stop light - remain in the left hand lane and turn left at next stop light (Broadway) Main gate for the arsenal is approximately 1 miles on the right after the stop light on Broadway. You will go right past the Main Gate. This is closed due to security conditions. One more right turn and you are at the South Gate (the only gate now open). Stop and register with the guards.
(* please see note below)

From the west:
NYS Thruway to Exit 24. After toll booth pick up I-90 towards Boston. Exit for 787 North. North on 787 until 23rd Street (Watervliet) exit. After exit, turn left at stop light. Remain in left lane. At next stop light (Broadway) turn left. Main gate for the arsenal is approximately 1 miles on the right after the stop light on Broadway. You will go right past the Main Gate. This is closed due to security conditions. One more right turn and you are at the South Gate (the only gate now open). Stop and register with the guards.
(* please see note below)

Note:
All visitors must have approval in advance to visit the Watervliet Arsenal site. Approvals may be arranged through your Vistec contact and take a minimum of 48 hours to process. A valid government issued photo ID (passport for foreign nationals) is required upon registration at the gate. All visitors must be escorted during their time at the Watervliet Arsenal site.